-
Hyperdrive Brass Weights (Thin) 6g (2)
$17.99(2) Thin 6g brass weights. Weights are tapped for 4-40 screws. Fits Hyperdrive pan cars. -
Hyperdrive 1/8 x .015 Brass Shims (25)
$5.001/8" ID shims for pan cars. Pack of 25.Wolfe Motorsports / Hyperdrive -
Hyperdrive 1/8 x .015 Brass Shims (10)
$3.501/8" ID shims for pan cars. Pack of 10.Wolfe Motorsports / Hyperdrive -
Hyperdrive 1/8 x .010 Brass Shims (10)
$3.501/8" ID shims for pan cars. Pack of 10.Wolfe Motorsports / Hyperdrive -
Hyperdrive 1/8 x .010 Brass Shims (25)
$5.001/8" ID shims for pan cars. Pack of 25.Wolfe Motorsports / Hyperdrive -
Hyperdrive 1/4 x .020 Brass Shims (25)
$5.001/4" ID shims for pan cars. Pack of 25.Wolfe Motorsports / Hyperdrive -
Impact RC Bolt-On Brass Weight
$9.99This is a new Impact Bolt-on Brass weight. It is drilled/tapped for 4-40 screws and will bolt onto the Outkast V2 and 1/12 cars when using the new Countersunk carbon weight rails.May fit other cars/brands as well. Features 1" bolt... -
HackFab Brass Battery Weight for Losi NASCAR GROM
$12.99This is a drop-in brass battery weight plate for the Losi NASCAR.Weighing in at 1.6oz, this thin weight plate requires no chassis modification and drops right into the battery slot, under the battery (over the velcro strap). It is keyed... -
Ovalwerks 23 Octane Brass Weight Set
$69.9523 Octane Brass Weight Set -
Powerhobby Brass Knuckle Weights (4) Axial SCX24 / AX24
$22.99Powerhobby Brass Knuckle Weights (4) Axial SCX24 / AX24 Features: Lower your rig’s center of gravity placing weight far out from the center of the chassis increases side hill capabilities while increasing the overall stability Works with the optional brass... -
Powerhobby Brass 7mm Hex Hub Weight Set Hpi Venture18
$24.99Boost the performance of your HPI Venture18 with the Powerhobby Brass 7mm Hex Hub Weight Set. Crafted from precision‑machined brass, these hub weights lower your crawler’s center of gravity, improving traction, stability, and climbing ability on even the toughest trails.... -
Hyperdrive 1/8 ID X .020 Thick King Pin/Hinge Pin Shims (25)
$4.99 Out of stockBrass 1/8 inch ID x .020" thick shims for kingpins, hinge pins or 1/8" axles (25pk) -
Hyperdrive 1/8 ID X .010 Thick King Pin/Hinge Pin Shims (25)
$4.99 Out of stockBrass 1/8 inch ID x .010" thick shims for kingpins, hinge pins or 1/8" axles (25pk) -
HackFab Carbon Mini Sprint Weight Bar (see options)
from $5.49These are the optional bolt-on weight bars for the HackFab Carbon Mini-Sprint (Losi Mini-B conversion). To keep the cost down, the kit is equipped with 3D chassis rails. These weight bars are an option part for adjusting and fine tuning... -
Traxxas Weight, Portal Housing, Brass (2) (34 grams)/ 2.5x8 CS (6)
$39.95Brass portal weights add valuable mass (34 grams) down low for improved off-road stability, without the negative effects of weighted wheels. Includes 2.5x8 mm screws (6) Weights require #8251X, 8251R, 8251A, or 8251G outer portal housing. -
Powerhobby Brass +4mm Weight (4) Axial SCX30
$11.99Add low-center weight exactly where it matters with the Powerhobby Brass +4mm Wheel Weight Set for the Axial SCX30. Designed to mount directly at the wheel hub, these precision-machined brass weights add +4mm spacing while increasing unsprung weight for improved... -
Treal Hobby 1.9" Brass Wheel Brake Disc Weights (Black) (64g) (2)
$16.98TREAL 1.9 Brass Wheel Weights 64g Brake Disc Weights (2) for TRX4 SCX10 III SCX10 II Capra 1/10 Crawler Wheels Features: - Compatible with: (* Attention)only fit for the wheels with 6 screws design, and the hex hubs are... -
Traxxas Wheel Weights Brass 31 Grams Each 2Pk
$19.95Each brass wheel weight adds 31 grams to the lowest part of your TRX-4M™ for improved anti-rollover stability and superior rock-climbing capability. Brass wheel weights replace the standard beadlock barrels and must be used with 9781 beadlock wheels. Sold as... -
Hyperdrive Aluminum .100 T-Plate spacers (4)-BLACK
$8.00(4) Aluminum shims with a 5/16" outside diameter, .100" thick and inside diameter fits a #4 screw. (4) .100" Black aluminum t-plate spacers. -
Impact RC Bolt-On Tungsten Weight (1 oz)
$24.99This is a new Impact Bolt-on Tungsten weight. It is drilled/tapped for 4-40 screws and will bolt onto the Outkast V2 and 1/12 cars when using the new Countersunk carbon weight rails. May fit other cars/brands as well. Features 1"...
