Skip to product information

Traxxas Stampede 4X4 BL-2s: RTR 1/10 Scale 4WD Monster Truck

SKU: 67154-4-BLUE
Availability: 1 in stock

Stampede® 4X4 is bigger and stronger than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer® tires for an aggressive monster truck stance. Stampede’s all-new BL-2s™ brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.

Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.

Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.

Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.


  • BL-2s™ Waterproof Electronic Speed Control
    • Heat sink accepts accessory cooling fan (#3340)
    • Three Programmable Drive Profiles
      • Sport Mode - Forward / Brake / Reverse
      • Race Mode - Forward / Brake
      • Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
    • Traxxas EZ-Set® one-button setup
    • Built-in two-stage low-voltage detection for LiPo batteries
    • NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
    • LiPo battery packs: 2 cells (7.4 volts)
  • 3300 kV Brushless Motor
    • Integrated cooling fan
    • Low-maintenance design
    • Efficient ball bearings
    • 3300 kV
  • TQ™ 2.4 GHz Transmitter
    • Full-size 2-channel transmitter
    • All-day comfort with precise long-range control
  • Extreme Heavy-Duty Upgrade Kit Installed
    • Strengthened C-hubs, axle carriers, and steering blocks
    • Extreme heavy-duty driveshafts
      • Oversize diameter
      • 6mm axles
      • Steel wheel hexes
  • Clipless ProGraphix® Body
    • Tough reinforced bumpers
    • Reinforced inner cage
    • Rugged roof rollover protector
    • Tailgate protector
    • Holds tight for intense action
    • Quick and easy removal
  • Chassis
    • Modular composite tub design
    • Secure battery hold-down latch
    • High angle bumpers
  • Suspension
    • HD-composite suspension arms
    • Oil-filled Ultra Shocks
    • White powder-coated springs
  • Steering
    • Chassis-mounted #2075 servo
    • Dual bellcrank design with integrated servo saver
  • Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • Oil-filled steel gear front and rear differentials
    • Large 32-pitch steel spur gear
  • Wheels and Tires
    • Large 2.8” graphite gray wheels
    • Tall 5.3” Sledgehammer® tires
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating


  • Length: 17.87 inches (454mm)
  • Width: 13.10 inches (333mm)
  • Ground Clearance: 2.44 inches (62mm)
  • Weight: 5.98 pounds (2.7kg) without batteries
  • Height: 8.34 inches (212mm)
  • Wheelbase: 11.62 inches (295mm)
  • Front Shock Length: 3.45 inches (88mm) - Long
  • Rear Shock Length: 3.98 inches (101mm) - XX-Long
  • Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer®
  • Wheels: 2.8 inches (71mm) graphite gray wheels
  • Speed Control: BL-2s™ electronic speed control
  • Motor (electric): BL-2s™ 3300 kV sensorless brushless
  • Gear Pitch: 32
  • Overall Drive Ratio: 15.36:1
  • Differentials: Hardened steel bevel, sealed, limited slip
  • Chassis Structure / Material: Modular composite tub
  • Brake Type: Electronic
  • Drive System: Shaft driven 4WD
  • Steering: Dual bellcrank with integrated servo saver
  • Radio System: TQ™ 2.4 GHz (2-channel)
  • Servo: Waterproof #2075
  • Skill Level: 1
  • Battery Compartment: 162mm x 47mm x 26mm
  • Required Batteries: 4 “AA” (transmitter), Vehicle
  • Motor Specs:
    • Type: BL-2s 3300kV sensorless brushless motor
    • Weight: 7.51oz (213g)
    • Length: 3.15 inches (80mm)
    • Diameter: 1.42 inches (36mm)
    • Connector Type: Traxxas Quick Connect Motor Plug
  • ESC Specs:
    • Input Voltage (cells): 6-7 Cells NiMH / 2S LiPo
    • Case Size: 1.53″ (39mm) x 2.31″ (59mm) x 1.21″ (31mm)
    • Weight: 3.07oz (87g)
    • BEC Voltage: 6.0 V
    • Reverse Delay: Yes, with lockout
    • Thermal Protection: Two-stage thermal shutdown
    • Ports: Auxiliary fan


  • Stampede 4X4 with BL-2s ESC and 3300 kV motor
  • Quick Start Guide
  • TQ™ 2.4GHz radio system
  • High quality maintenance tools

What You’ll Need:

  • Batteries - Stampede 4X4 requires a single NiMH or LiPo battery
  • Charger - Traxxas EZ-Peak Live charger (#2971) is recommended for easy and fast charging performance
  • AA Alkaline Batteries - Four AA alkaline batteries for the transmitter