New for 2025, the PRO version of the HackFab Mini Late Model conversion for the Losi Mini-B or Mini-T 2.0! This is based on the super popular V2.2 oval chassis but with some new tweaks that make this version shine on carpet. The V2.2 is staying a current option, as it is very versatile and cost effective. The PRO is for those that want a slight edge on carpet with a couple improved tuning options.
Quick notes on the PRO chassis compared to the V2.2:
Increased chassis width (the chassis is approx 3mm wider than the V2.2 WITH the optional widener kit, but built into the main chassis plate with no widener needed).
Increased battery mounting area length provides more tunability for battery position.
More offset weight. The battery is a little further inboard than a V2.2 with widener kit, but the chassis has holes allowing for the Impact RC Brass (HFB10027) or Tungsten (HFB10026) (not included). This can gain you some serious left-side weight bias if desired.
The right side of the chassis has been shaved down and lightened (no more provisions for mounting the optional nerf bars).
The same changes hold from the V2.2 to the PRO: Backwards compatible with most V2.1+ conversions and parts (can upgrade your V2.1 or V2.2 with just a replacement chassis) Improved battery placement options Bumpouts on chassis to provide more options for transponder or weight placement Added rear bumper mount Added nerf bar mount Added additional servo hole 7mm forward of stock to allow installation of aftermarket servo with straight horn
This chassis conversion kit will convert your Losi Mini-T 2.0 / Mini-B into a full fledged oval car. It brings the wheelbase to that of the old 2010's Losi Mini Late Model - allowing for all of those aftermarket bodies from McAllister Racing and Kipps Hobbies to fit. It also provides a left offset weight bias for better handling.
What's included in the kit: Lower Chassis Plate 2x 2" body posts with screws (front) 2x 3" body posts with screws (rear) Rear Body Mount plate 2x Chassis Brace spacers Kickup wedge (aluminum) Aluminum Chassis spacer Aluminum Battery brackets with built-in velcro strap Carbon Kydex front bumper All necessary hardware
It should also work with most of the McAllister bodies for minis including the Late Models, NASCAR COT, NASTRUCK, Street Stocks, and others.
The chassis is universally designed to fit "most" medium capacity Lipos, ranging from the stock pack to those such as the Turnigy Nano-tech 1500mah 35-70C 2s and a slew of others. Not knowing what people will want to run and what classes may develop, allowing for fitment of a larger capacity battery to pair with optional brushless options seemed like a logical choice.The battery brackets are 35mm wide and should fit most size lipos in this scale.
Note: This is a chassis conversion kit only. You will need to supply a donor vehicle to make a complete vehicle. Complete car shown as representation only
