Skip to product information
Looking to lower your Traxxas Slash (or other car that uses 3mm diameter shock shafts)? These internal shock spacers (aka limiters), allow you to shorten the length of available stroke on your shocks for customized ride height and handling characteristics. This is particularly useful in oval and on-road style racing where you do not need the massive up-travel from the stock shocks. These will lower the car.
For example, running enough spacers to essentially lower the rear arms to sit level with the ground, would be great starting point for oval/road racing.
Spacers are 3d printed in varying sizes from 1.5mm to 12mm and color coded to the key on the lid for easy size referencing.
Included are 36 spacers per kit (1.5mm x 10, 3mm x 10, 6mm x 8, 12mm x 8).
For example, running enough spacers to essentially lower the rear arms to sit level with the ground, would be great starting point for oval/road racing.
Spacers are 3d printed in varying sizes from 1.5mm to 12mm and color coded to the key on the lid for easy size referencing.
Included are 36 spacers per kit (1.5mm x 10, 3mm x 10, 6mm x 8, 12mm x 8).